16" Aero Precision & Ballistic Advantage .308 WIN DPMS Profile DIY AR-10 Kit (AGBC308F-1615AEK-4)

$ 945.26

Sold Out

Aero Precision

Building your own custom .308 AR-10 rifle is a snap when you have all of the right parts. It's even easier when someone has already done the legwork to source all of the components, made sure they are of the highest quality and fit and then put them all into a nice little package for you and it's a complete no-brainer when they do all of that and then offer it to you at a price you cannot beat if you tried putting it all together yourself AND THEN offering to ship it all to you FOR FREE!

Well that's exactly what we have done and you're going to love it!

This build kit includes all of the following high-quality parts:

  • 16" Ballistic Advantage Modern Tactical Government Profile .308 WIN Chambered, 1:10 twist Barrel - 4150 CrMov, Magnetic Particle Inspected, High Pressure Tested, M4 Feed Ramps, Mid-Length Gas - Salt Bath QPQ Black Nitride Finish
  • Bolt Carrier Group - Buyer Choice - SEE DETAILS BELOW
  • Aero Precision M5 7075 T-6 Aerospace Grade Aluminum Stripped Upper Receiver, Cerakote Magpul FDE Finish, M4 Feed Ramps, 2795 takedown pin holes (DPMS Pattern), DPMS High Profile (.210) Tang)
  • 15" Aero Precision M5 Enhanced Free-Float Keymod Handguard - Aerospace Grade 6061-T6 Aluminum, Cerakote Magpul FDE Finish, Gun-Quality Steel BAR Barrel Nut
  • Ground Zero Precision Ultra-Low Profile Gas Block, .750, QPQ Nitride Black Finish
  • Seamless Stainless Steel Rifle Length Gas Tube with Roll Pin
  • A2 "Birdcage" 5/8 X 24 Flash Hider with Crush Washer - Salt Bath QPQ Nitride Finish
  • Premium Mil-Spec AR .308 Charging Handle - 7075 T-6 Aerospace Grade Aluminum, Hard Coat Anodized (Black) to MIL-A-8625
  • Mil-Spec AR .308 Ejection Port Door Assembly with Pin, C-Clip and Spring
  • Mil-Spec "Target" Forward Assist with Spring and Roll Pin
  • Complete Mil-Spec AR-10 / .308 Lower Receiver Parts Kit with "Easy Grasp" extended takedown and pivot pins - DPMS Gen 1 Specifications
  • Enhanced Mil-Spec AR .308 6-Position Carbine Buffer Tube - 7075 T7 Aerospace Grade Aluminum, Hard Coat Anodized (Black) to MIL-A-8625
  • Mil-Spec Diameter Enhanced Alpha 6-Position Patrol Stock - Black
  • AR-10 / .308 Carbine Buffer Spring
  • 3.8 oz AR-10 / .308 Carbine Buffer
  • Mil-Spec Castle Nut
  • Mil-Spec End Plate

Aero Precision M5 Gen 2 Upper Receiver:

FDE Aero Precision M5 .308 AR-10 Upper Receiver

The Aero Precision's second generation M5 AR-10 .308  upper receiver gives you the look and feel of an expensive billet receiver with the strength of a forging and at a fraction of the cost. Forged from 7075-T6 aluminum and precision machined to fit seamlessly with the Aero Precision M5 lower receiver and most other manufactured lower receivers designed to DPMS Gen 1 specifications. Designed to accept standard .308 build components without spoiling the fun with proprietary BS the Aero Precision M5 is the perfect upper for your next big bore build project. 

  • Precision Machined from 7075 T-6 Aircraft Grade Aluminum
  • Cerakote Magpul FDE Finish
  • M4 Feedramps
  • .2795 takedown pin holes (DPMS Gen 1 Pattern)
  • Lazer engraved T-marks
  • DPMS High Profile (.210) Tang)
  • Seamlessly fits the Aero Precision M5 Lower Receiver and most other manufactured lower receivers designed to DPMS Gen 1 specifications

Aero Precision Gen 2 Enhanced Keymod Handguard:

15" Aero Precision M5 Keymod AR-10 .308 Free Float Handguard

  • Added quick disconnect sling socket at the 3, 6 and 9 o’clock positions
  • Milled additional surfaces along flats to aid with gripping and add visual appeal
  • New profile of the Picatinny Top Rail
  • 1pc free float design
  • Rail is Machined from 6061-T6 Aluminum
  • Cerakote Magpul FDE Finish
  • Built in Anti-Rotation tabs
  • Scalloped rails
  • Continuous top rail
  • 1.72" inside diameter fits most muzzle devices and 1.5" suppressors
  • Compatible with low profile gas blocks
  • Compatible with all properly spec'd Keymod rail sections & accessories.

16" Ballistic Advantage .308 WIN AR-10 Barrel:

Ballistic Advantage 16" .308 WIN AR 10 Barrel

The Modern Series Tactical Government Profile .308 chambered (DPMS style) 16 inch Series Barrel by Ballistic Advantage is machined from 4150 Chrome-Moly Vanadium steel with a QPQ Corrosion Resistant Finish and QPQ coated M4 feed ramp extension.

All Ballistic Advantage barrels are manufactured under our ISO:9001 and AS:9100 (pending) quality certifications. Each barrel is inspected over 15 times before it ever reaches you. 

  • Barrel Material: 4150 QPQ
  • Barrel Type: Button Rifled 
  • Barrel Caliber: .308 WIN
  • Barrel Twist: 1:10
  • Barrel Length: 16”
  • Barrel Profile: Modern Tactical Government
  • Barrel Gas System: Mid-Length
  • Inside Finish: QPQ Salt Bath Nitride         
  • Outside Finish: QPQ Salt Bath Nitride     
  • Muzzle Thread: 5/8-24 TPI
  • Gas Block Diameter: .750" 
  • Gas Port Diameter: Not Disclosed by Manufacturer
  • Barrel Extension: LR-308 (DPMS Compatible)
  • Weight: 1.69 lbs
  • Magnetic Particle Inspected
  • 11-degree Target Crown

Bolt Carrier Group Options:


Recommended tools for assembly (not included):